Your Cart(0)

Parts

6mm Vibrating "Bristlebot" Motor

This little vibrating motor works for all sorts of projects, especially our Bristlebot Kits. Specifications: Dimensions: .2 in x .4 in Runs from 1.5V or higher Takes between 1.3V to 3V

$2.00

10mm Vibrating "Solar Bug" Motor

Need something small with a big vibrating punch? This might be the motor for you. Motor runs from 1.5V - 3V. 23mm long. Has small wire leads on the back. If you're looking for Bristlebot motors, try the 6mm Vibrating "Bristlebot" Motor. This 10mm motor is too powerful to work well on a small Bristlebot. 

$2.50
In Stock

1N914 Diode 10 Pack

The 1N914 diode is something every solar project needs. It blocks the flow of power in one direction, which is how you keep power from flowing back into the solar cell at night.  This diode is great, but should only be used in solar projects where the solar cell is at or below about 200mA. The diode only allows up to 200mA, so the extra energy will be wasted if you have a massive cell.  Contains 10 Diodes in this pack.

$1.50

2V 40mA "Solar Cockroach" Solar Cell

This small solar cell is encased in plastic and puts out 2V at 40mA.  Specifications: Dimensions: 60mm x 30mm Soldering tabs located on back of cell

$3.00

4V 60mA Solar Cell

This small solar cell puts out 4V at 60mA and fits perfectly inside an Altoids tin. Specifications: Dimensions: 58mm x 54mm Labeled positive and negative soldering points on back Mounted on hard plastic

More Info
$5.00

6v 200mA Solar Cell

In need of a powerful cell to charge up some batteries? Or possibly a USB device? Look no further than this powerful 6V 200mA solar cell. Specifications: Dimensions: Solder tabs on back  Encased in hard plastic

More Info
$11.00

6V 80mA Solar Cell

A little cell with quite the kick.  Outputs 6V at 80mA.   Measures only 73mm x 53mm.  Has solder tabs on the back.  Encased inside a hard plastic, making it tough.  Not unlike an alley cat.  Tough.  Yet sweet.  Like a candy Apple.  So maybe you could call it the Candy Crab Apple of the solar cells on this site. 

More Info
$5.00

AA Battery Holder - Triple

Holds 3 AA batteries in a series circuit.  If you're using regular AAs that gives you 4.5V. If you're using rechargeable batteries that'll give you 3.8V. Also features 6 inch leads as well as a red ribbon for easy battery removal.

$2.50

Lithium Battery Micro USB Charge Controller

Lithium batteries are not like regular AA batteries.  They need very specific condition to charge safely. For ANY project where you plan on charging a lithium battery you need an appropriate charge controller. What could you use this for?  How about combining this circuit with one of our DC to USB circuits and making a recharging pack for your gadget?  Or adding a solar panel along with a DC to USB circuit to make a solar powered charger?  The...

$8.00
In Stock

AA Rechargeable Batteries

Standard 1.2V rechargeable NiMh AA batteries.   Buying this gets you one single battery.  Buy in pairs so they don't have to be alone.

$2.25

Coin Cell Battery Holder- Sewable

This nifty little battery pack is perfect for any sewing project due to the sew through holes on each side.  It works with a standard CR2032 3V battery, which is just what you'd want for lighting up LEDs.

$2.00

CR2032 - 5 Pack

 A five pack of CR2032 batteries. Handy for small robots, flashlights, and LEDs.

$3.00

Single USB Boost + Lithium Charge Controller Board

 Why deal with two different boards when you can just use one?  This little board features the combined power of our USB Charge Controller and our Lithium Charge Controller Boards.  All in one very cute package. To use, just solder in a 3.7V Lithium Battery of your choice.  Use the built in Mico USB Port to charge the Lithium Battery, and the standard sized USB port to charge up a gadget.   Features a button activated 4 LED charge status on th...

$16.00
In Stock

Lithium Battery Mini USB Charge Controller

Lithium batteries are not like regular AA batteries.  They need very specific condition to charge safely.  For ANY project where you plan on charging a lithium battery you need an appropriate charge controller. What could you use this for?  How about combining this circuit with one of our DC to USB circuits and making a recharging pack for your gadget?  Or adding a solar panel along with a DC to USB circuit to make a solar powered charger?  Th...

$8.00
In Stock

Lithium Charge Controller With 2.5mm Jack

This little charge controller features a built in 2.5mm Barrel Jack.  The circuit is designed to work with any 3.7V single cell lithium ion or polymer battery.  Features on board power regulation and monitoring.  Built in status LEDs show charging status. Input volage from 4.5V - 5.5V, imput amperage up to 1.5A.

$12.00
In Stock
SALE

USB Charging Circuit

A handy DC to USB assembled circuit that we use to make our Altoids USB chargers. You can use it too. Takes DC power from as low as 2V and bumps it up to the 5V USB needs.  This circuit works fine with most USB products out there.  While we can't test out every USB product in the world we can say with some confidence that it works with the these products below. Apple Products (except for the iPad 2 & 3, and the iPhone 3GS) Garmin GPS An...

$6.00
$9.00

Mini Breadboard

 It's a small breadboard.  Not even enough to a decent loaf.  More like a brownie's worth of bread at best.  Brownie Board?  But yeah, it's small enough to fit into an Altoids tin with more than half the space left over.  They come in random colors and we send you one in a random color.   The bottom of the board is actually a foam tape, take off the protective layer and stick it to a surface if you want.

$3.00
In Stock

Half Sized Solderless Breadboard

A simple 400 contact solderless breadboard.  This board features 400 contact points, positive and negative rails, and a foam bottom.

$5.00

Solderless Breadboard Jumper Set

Every solderless breadboard needs a jumper set, it just makes life far easier.  Our set of 35 includes 4 different sizes in a wide variety of colors.  Jumper sizes include 115mm, 160mm, 200mm, and 240mm. 

$7.00

9G Metal Gear Servo

A micro 9G sized servo with metal gears.  Comes with additional mounting screws and arms.

$15.00

3540 N 126th St, Unit J Brookfield, WI 53005 United States 262-788-9223

We Accept...

We Accept Visa We Accept Discover We Accept American Express We Accept Mastercard We Accept PayPal